Inflatable or Regular Hot Tubs? Which is best for you?

There are many reasons to own a hot tub. Some people enjoy the relaxation they feel from sitting inside of a hot tub. Others enjoy how the warmth of the water relieves tension and stress from their sore muscles. If you are considering purchasing a hot tub, you may have seen some inflatable models of hot tubs. What are the similarities and differences between an inflatable hot tub and a regular hot tub?

The first thing to consider is the price difference. Inflatable hot tubs are relatively inexpensive. Most of them are between $300 and $500, while other regular hot tubs are many thousands of dollars. The price difference mainly stems from the differences in materials and the functions of the hot tub.

An inflatable hot tub is typically made of a strong vinyl material which is inflated to create the tub. These inflated tubs usually hold around 250 gallons of water. In contrast, a regular hot tub is usually made of various materials, including an outer vinyl composite exterior and an acrylic shell on the interior. These types of materials are made to be strong and weather resistant for many years. Regular hot tubs usually hold at least 400 gallons of water, almost double what most inflatable hot tubs hold. Overall, inflatable hot tubs will be smaller than regular hot tubs.

hot tub

Image Source: hottubmag.com

Even though inflatable hot tubs are smaller than regular hot tubs, they are more portable. Inflatable hot tubs can be placed almost anywhere in a homeowner’s yard. They are also relatively simple to disassemble and store away for a later time if needed. On the other hand, regular hot tubs can weigh hundreds of pounds and often require a strong deck or concrete slab to support the tub. Homeowner’s must think ahead about where they would place a regular hot tub; however, an inflatable hot tub would be great for someone with minimal space or for someone who would only need the hot tub temporarily.

Inflatable Hot TubAnother important consideration is the electrical requirements for a hot tub. Most inflatable hot tubs use a small water pump, which heats and circulates the water throughout the tub. These heated pump units are convenient because they can be plugged into almost any outlet outside of a home. This is because the pump is only heating the water and gently pushing the water through jets inside the inflated hot tub.

In contrast, a regular hot tub sometimes requires a 220 volt plugin, which is not standard in most exterior outlets. This means, the homeowner would have to hire an electrician to run a 220 volt outlet to where the hot tub will be plugged in at; however, a regular hot tub requires more power simply because its pumps and heaters are able to heat the water hotter than the inflatable models and also push the water out of the jets much faster, making the hot tub jets feel more powerful.

In conclusion, if you are on a tight budget and want to experience some benefits of a hot tub, then an inflatable hot tub may be your best choice. They are portable, easy to setup, and most of them heat the water above 100 degrees Fahrenheit and have some sort of water jets in them. If you have more money to spend and want the ultimate hot tub experience, then a regular hot tub is what you want to purchase. These tubs will heat the water well passed 100 degrees Fahrenheit and offer great therapeutic benefits from their powerful water jets.

New Fat Tire Folding Electric Bike

Riding is not only interesting but also brings much fun to your family. The 500 W Motor provides a strong driving force thus ensuring you can ride for a long distance without having to lighten. The Lithium Cell battery charges within less than eight hours and can store the charge for an extended period to allow you to reach your destination successfully. These folding bikes have a high configuration and LCD light that allows riding comfortably in any type of terrain.

The real and front brake disc is made with Aluminum frame thus making them relatively light and efficient. The bicycle handlebar height is approximate 1150 mm while that of the saddle to ground ranges from 840- 990 mm thus even your kid can comfortably ride this bike. For maximum stability, the center distance between the two wheels is 1185 mm although some negligible deviation exists. The bike can move at the maximum speed of 20 Mph although the Throttle type has the variable speed control panel that is about the Twist Throttle.

These racing bikes are designed with a streamlined shape for speed and distance. Additionally, race bikes have high-pressure tires, narrow shape and strong drop handlebars that are strong to ensure you are safe as you ride with high speed. However, it is important to note that distance efficiency and speed come at a reasonable price. Although these road bikes are not that good at withstanding dirt and rocky trails, they are equally durable as mountain bikes.

Serious riders who want to use their cycling bikes for exercise knows the importance of having a high-quality road bike. For instance, if riding along trails doesn’t scare you to get dirt getting a bike with sturdy tires and beefed suspensions. Road bikes are designed particularly for riding over rugged mountain terrain. Additionally, they have a durable and strong flame, low gears for climbing hills as well as upright handlebars for easier control.

The front suspension enables the beginner to easily ride even in dirt roads in mountainous regions, trails and even in paved trails comfortably. You will greatly benefit from a smooth and comfortable ride that isn’t too bulky or casual riding.

Designed particularly for beginners, kids and they are available in a range of sizes and models that are greatly styled. Kids’ bikes are perfectly sized according to the wheel size and the age of the kid. These bikes fond easily such that even minors can make adjustments of the height they are comfortable with. Since some are electric-powered and thus you can move for a long distance without pedaling very hard.

Pushbikes also known as balanced bikes are specifically designed for toddlers who are learning biking for the first time and therefore they have no pedals but rather the kid straddles the bike while steering the bike with the handlebars as they familiarize themselves with riding the bicycle. After your kid is confident enough on the training they can advance to bigger bikes with over 21 gears as they train themselves using handbrakes.

For more, make sure you check out Bike Observer.

What type of bathroom sink should you buy?

The decision on which type of bathroom sink to install is sometimes a tall order to some people. This is because there are so many types of sinks in the market. Additionally, the sinks are made of various materials which makes the choice complicated. However, the decision should be arrived at based on the bathroom size, style, and design.

Currently, vintage copper bathroom sinks are proving to be the commonest and frequently used material. Choose your bathroom sink among the following.

Wall Mount Sink

This is the commonest type of bathroom sinks. It works well with the bathroom which has limited square footage. They also fit very well for powder rooms. Since they occupy most space, medicine cabinets might be forced as part of what the sink serves.

Top-Mount/Self-rimming

This type of bathroom sink is also called a drop-in bathroom. These names are all derived from the way this bathroom is installed. It has a rim or lip that allows it to sink under a countertop. This is what makes it self-rimming. It is easily installed because the countertop is not interfered with. It is also easily adaptive to many bathroom styles.

Undermount Sink

Contrary to self-rimming sinks, under mount sinks install beneath the countertop. The surface of the counter is usually made of granite or marble. The only undoing bit of under mount sink is in its cost. It is a bit expensive. Additionally, poor installation may lead to a leak.

Pedestal Sink

This is a self-supporting sink whose hardware extends to the ground. The sink is self-supporting as it has its own leg with the whole drainage system installed in it. This sink is floor mounted. Due to space consumption, this bathroom sink works best powder rooms or bathrooms not frequently used. It is therefore advisable to install it in guests rooms.

Semi – Pedestal Sinks

That is a mixture of a wall mount and a pedestal sink. It resembles the pedestal sink only that the downward extension or the leg doesn’t reach the floor. The extension drops up to halfway and then attaches to the wall.

Vessel Sink

As the name suggests, this sink is made of a vessel in a basin form placed on top of a surface. The vessel may be of many forms such as stone, crystal, galas, marble, mosaic or ordinary bowls.

Vanity Sink

Vanity sinks are two in one component. On top of being a sink, it is also a cabinet or simply a table. This installation works best with spacious bathrooms. The top sink may be a self-rimming, under mount or even a vessel.

Console Sinks

This is closely related to vanity sinks but instead of cabinets, this sink has only legs. Different from pedestal sinks which have one leg, console sinks have two or four legs. It is highly mobile occupies comparatively less space.

The choice of the bathroom sink to install involves a myriad of things to consider. Space is a top thing to consider. Class in terms of style and size should also be taken into account. Consider the expertise of your installer to avoid leaks.

Gamers Prefer Playing In A/C Rooms – Read This To Find Out Why

In the following paragraphs, we will throw some light on the fact why gamers prefer playing in air-conditioned rooms. It is a fact that air-conditioning units are not only meant for the bedrooms and the living rooms, but they can also be used anywhere you like as long as they provide you with comfort. In case you happen to be a gaming buff, it is time for you to get serious regarding air-conditioning given that they can prove to be extremely helpful for running your computer not to mention console gaming.

Let us take a look at why air-conditioning is imperative while playing computer games.

1. Provides protection to your investment

It is quite expensive for an average person to purchase a video console. Its price can range anywhere from US$ 200 to US$ 500 which only the affluent can afford these days. Moreover, consoles are going to be more effective in the cooler places and they will also last longer in case you to maintain a cool temperature. On most occasions, gamers invest quite a few hours in playing these games and consequently, it is quite natural for the game consoles to get damaged because of overheating. However, this is can be solved by installing an air-conditioning unit in the room where the games are being played. (check these recommendations)

2. Enhancing your performance levels

You might find it quite difficult to concentrate for a long time on a hot day since hot air might dehydrate your system causing you to feel sluggish in the course of time. This will not help to enhance your performance while playing top-notch games and you’re likewise prone to make some serious errors that can prove to be quite costly in the long run. However, setting up an A/C unit in your room can help to keep your body hydrated and cool in a comfortable environment so that you do not feel lethargic at all.

3. Provides comfort

Avid gaming buffs are known to invest as many as 24 hours in a single day at a stretch while playing complicated computer games. Sitting in an air-conditioned room will allow them to feel much more relaxed as well as comfortable throughout a particular game. Some games require you to combat in a fierce battle with zombies, dragons, robots, etc. and there is a possibility for you to snap while fighting these enemies sitting in a hot room. On the contrary, gamers who play these games in a cooler and comfy atmosphere are stressed to a much less extent.

4. Can enhance your bedroom space

It will be a prudent idea to make your air-conditioned gaming room serve as your bedroom as well. Here you can place a bed which can easily transform into a couch that can be used while playing computer games. In some cases, gamers might also fall asleep while playing any particular game, and if it is so, there is no need to go to a separate bedroom in order to sleep there.

5. Minimize rage quitting

On many occasions, it has been found that some gamers tend to quit in a rage while failing repeatedly in a particular game. This is more common in situations where the gamer is playing in extremely hot conditions. However, the presence of an air-conditioning unit will help to make the room’s atmosphere extremely comfortable and he’ll be less prone to rage quitting as well.

Learn more about making the perfect environment at your business or home at Climatastic.com

How To Ripen Bananas

Banana is a wonder fruit. Most of us like it because of its sweet taste, contains plenty of great nutrients for healthy benefits, and once you have an empty stomach, it serves as quick filler. Several questions arise in mind of people about bananas, and how to ripen them fast. If your bananas don’t get ripe as expected or you try other methods, and they don’t workout, then here are some tips on how to ripen bananas quickly.
Bananas are produced in mature conditions when they are not ripe. Leaving a banana on a banana tree for it to ripe may take several few days than expected for it to ripen. However, if you are a bananas producer, you should harvest the fruit when it is still green in color for easy transportation and storage.

Here are some of the known tips on how to ripen bananas very fast;
You can place the bananas in a paper bag with an apple in it. Ethylene gas emitted from the apple gets trapped in the bag. With the help of that gas, the bundle of bananas will get ripened fast. The bag must be kept in a dry place with less of moisture and ensure to use only paper bags. Remember, a plastic bag will not help as it will not allow the emitted ethylene gas to circulate inside the bag. It takes almost 24 to 36 hrs for the banana to ripe properly. Feel free to eat them as you wish, otherwise keep them in a refrigerator so that the ripening will slow down. If you want to get a ready to eat banana with no time, the best method is to place the green bananas in a pre-heated oven at 300 degrees Fahrenheit. The outer skin will, of course, turn black, but from the inside, it would be right to eat.
Now that you got the simplest and quickest way to ripen bananas, let’s try out its procedure:
The ingredients and materials you need are a container or a paper bag, the bundle of bananas of course and an apple.

1) Put both the apple and the banana in the paper bag or the container you are using and wait for a few days, check them time to time.
2) Check regularly to see how much riper they have become with time. If they are not ripe enough, leave them in the bag and check back later. But be careful for them not to over-ripen.
3) if they over-ripe without knowing, make smoothies with them or try using them for a banana pie.
Chemical methods can also be used to ripen bananas. In chemical method, bananas are kept in blocked rooms containing calcium carbide. Acetylene emitted throughout the room heats up which inturn leads to the ripening of the bananas. However, some methods like these should be avoided at homes because they are harmful and expensive. People should stick to the paper bag method because is the cheapest and recommended way to ripen bananas.